Feature update windows 10 version 1803 wont download

Seems like you are going through what was….. Check your bios. Under the chipset tab look for something called Virtualization something. May also be called VT-D. If you see that setting disable it then save and exit. Try the update again. Also, I'm on an older motherboard and chip. If you have a newer system this may be irrelevant. My specs below:. Greg Smith January 4, pm. Matthias October 25, pm. It worked. I just disabled my antivirus for the duration of the installation.

I was not present to observe the exact numbers that it jumped to. Elle October 11, am. Marcus September 9, pm. Mike December 1, am. Matt December 18, pm. Alex December 25, pm. I have to say — this fix worked for me as well. Unfortunately, reenabling Intel VT-d hangs the boot, so it has to remain disabled. Robert Douglas January 12, am. David J August 31, pm. Thanks for the exhaustive treatment of this issue.

Fortunately, my problem was solve by following some of the first steps that you suggest. Remove antivirus program 2. Remove USB wireless devices 3. Open 'Services. Clicked on Update Assistant on my desktop. Tom August 22, pm. Ralph August 17, pm. Buegues August 17, pm. Instead of switching off Windows Update you can hide particular update. In order to do that get from microsoft site and run script named wushowhide. Dinsdale July 31, pm. Thanks for all the tips. After update, smooth sailin'.

Well, still took 2,5h to complete. Sarmad November 18, am. Updating the BIOS solved my problem as well. I have been trying to install this Windows update for about 2 years now. Finally it's done. Big thanks to Dinsdale. Thank you so much! The update failed a number of times on my machine, and I started to look for a solution. I found this page, I followed these instructions and now the update is in.

Thanks again! Moorea July 5, pm. Moorea: CCleaner is not an antivirus. But is always better to have less programs at startup during upgrade. Adam June 27, am. Tim Richardson June 26, am. I had a big problem with it getting stuck at reboot. I followed step Method 3 the previous tips did not work and I also used msconfig to disable every startup service which was not Microsoft. I also deleted logitech software and some residual anti-virus.

I can tell you that Windows updating is a lot worse than linux these days. This was a bad experience. Thank you so very much for the tips. Charles May 28, pm. Thank you for this article. Daan May 28, pm. Thanks for the article. I tried all the steps and updated the graphics card drivers prior to the update installation. Fritz May 16, pm.

Mike Hayes May 14, am. Using the above step any won't work on my PC as Windows Update service properties shows it running and all is grayed out. Yes I'm Admin 3. Double click to launch Windows Update service's properties.

Doesn't work because everything in is grayed out! I don't remember for sure, but I had a client last month whose PC had been failing on since it's release due to out of memory issues and these same steps were called for. None worked. I ended up creating a boot media with the latest patches incorporated and doing the reinstall Windows I wasted so much time trying so many other ways until I bit the bullet and did the reinstall.

JohanM May 10, am. Thanks for your time and great knowledge. In my case the problem was in differenet place. Problem was in encryption of my system partition.

I am using VeraCrypt… Solution for me was uncrypt system drive and then install windows update Sorry for my English. Phiovo May 8, pm. I've copied the answer from the linked thread but have modified Step 1 to point to ADK for Windows 10, instead of Windows 8. At least for me, I was able to find a pretty simple fix for this problem although I was upgrading from Windows 8. So, it ends up trying to find it at the default location which clearly does not exist causing the installation to fail.

To do that all we need is to get it installed. To do so:. Was this reply helpful? Yes No. Sorry this didn't help. Thanks for your feedback. If you can't install a feature update using Windows Update, you can upgrade to latest Windows 10 version using its ISO file. If you still face the issue, try these steps referenced from Genopsyde's post at page 4 of this thread:.

For "Specify Location"; leave the default option selected which should be "Install the Windows Click Next. Try running your Windows 10 install again.

The patches will automatically be downloaded and deployed. As you know, Microsoft's Windows 10 version updates are released as feature packs. Deploying few feature packs are tricky as dependency files ISO files are required. For successful deployment, we recommend downloading the respective dependency file ISO file from the vendor's site and upload it to the patch store using the upload patches option or manually place the ISO file in the patch store before deployment.

Before deployment, run through the Compatibility Check available under the Important Notes section to find if you meet all the minimum requirements that impact upgradeability.

To deploy Windows 10 feature packs, follow the below steps. You can add the dependency file ISO file either through the upload patches option or by manually placing it in the patch store.